Please upgrade to the new Edge browser, or use Chrome, Firefox or Safari, before continuing. Internet Explorer will not support the best shopping experience on the ADI Digital Branch site after March 12, 2021. close button
products
ADI a Resideo company ADI a Resideo company

GJD GJD397 D-TECT X Repeater

Brand: GJD
ADI #:GJD397 Model #: GJD397  Name: GJD GJD397 D-TECT X Repeater
  • The weatherproof IP55 receiver enclosure can be mounted externally or internally up to 500m s in line of sight to the detectors
  • Code recognition programming of each detector is both rapid and simple via a plug-in connector between detector and receiver
  • As a system check, every one of up to 16 detectors automatically sends out a signal every 2 or 15 minutes to confirm that they are active. If a return signal is not received from a registered and recognised detector, a'RF Loss' LED switches on and the contact is activated at the receiver
GJD GJD397 Pir W/Less D-Tect X Repeater

Product Overview

General Information

500m Wirless Repeater

The D-TECT X Repeater can be used to extend the RF range of a D-TECT X detector, or to boost signal in a poor reception area.

The D-TECT X Repeater must be placed within 500 metres line of sight between the D-TECT X detector(s) and D-TECT X Receiver(s). The unit will repeat all signals from D-TECT X detectors within range and as such does not require any programming to function.

Main Features
  • The weatherproof IP55 receiver enclosure can be mounted externally or internally up to 500m s in line of sight to the detectors
  • Code recognition programming of each detector is both rapid and simple via a plug-in connector between detector and receiver
  • As a system check, every one of up to 16 detectors automatically sends out a signal every 2 or 15 minutes to confirm that they are active. If a return signal is not received from a registered and recognised detector, a'RF Loss' LED switches on and the contact is activated at the receiver
  • An RF continuity test mode facility tests the strength of the RF signal from each detector at the receiver location. When it is necessary to conduct a site survey prior to installation, the receiver can be powered temporarily with a PP3 9 V battery
  • The D-TECTxreceiver is powered by a 12 - 24V AC/DC supply
  • The D-TECTxreceiver is supplied as standard with a 4 channel module pre-installed. There are also expansion slots which will accommodate up to 3 additional 4 channel modules giving a total of 16 channels. Therefore the receiver is able to control and monitor up to 16 D-TECTxdetectors
  • An expansion module is connected via the ribbon connector to the circuit board of the pre-installed 4 channel module and is simply slid into the next available mounting slot in the receiver enclosure
  • An expansion module is connected via the ribbon connector to the circuit board of the pre-installed 4 channel module and is simply slid into the next available mounting slot in the receiver enclosure
Information
Category : Alarm Control Panels & Keypads, Control Panel Repeaters, Intrusion, Products

Specifications

General Information

ADI Part Number
GJD397
Brand Name
GJD
Manufacturer
GJD Manufacturing
Manufacturer Part Number
GJD397
Product Line
D-TECT X
Product Model
GJD397
Product Name
D-TECT X Security Device Signal Repeater
Product Type
Security Device Signal Repeater

Physical Characteristics

Application/Usage
Signaling System
Depth
75 mm
Height
210 mm
Weight (Approximate)
658 g
Width
180 mm

Power Description

Input Voltage
12-24V AC, DC
close button