Name: GJD GJD392 R D-TECT X 4-Channel Receiver
Brand: GJD
SKU: GJD392

GJD GJD392 R D-TECT X 4-Channel Receiver

Brand: GJD

ADI #:GJD392 Model #: GJD392 Name: GJD GJD392 R D-TECT X 4-Channel Receiver

Code recognition programming of each detector is both rapid and simple via a plug-in connector between detector and receiver
As a system check, every one of up to 16 detectors automatically sends out a signal every 2 or 15 minutes to confirm that they are active. If a return signal is not received from a registered and recognised detector, a'RF Loss' LED switches on and the contact is activated at the receiver

Product Overview

General Information

The D-TECT X Receiver is a 500 metre range, 4 channel receiver expandable to 16 channels. The receiver is compatible with the D-TECT X ranges of wireless detectors and communication using 868MHz transmission protocol. This D-TECT X receiver can be expanded with the addition of up to three further 4 channel expansion modules. This allows the receiver unit to monitor the active state of up to 16 wireless D-TECT X movement detectors.

Main Features

Code recognition programming of each detector is both rapid and simple via a plug-in connector between detector and receiver
As a system check, every one of up to 16 detectors automatically sends out a signal every 2 or 15 minutes to confirm that they are active. If a return signal is not received from a registered and recognised detector, a'RF Loss' LED switches on and the contact is activated at the receiver

Information

Category : Alarm Control Panels & Keypads, Control Panel Receivers, Intrusion, Products

EAN Code : 5034689039216

Specifications

General Information

ADI Part Number

GJD392

Brand Name

GJD

Manufacturer

GJD Manufacturing

Manufacturer Part Number

GJD392

Product Model

GJD392

Product Name

D-TECT X Receiver - GJD392 500m Wireless Receiver

Product Type

Security Wireless Receiver

Wired/Wireless

Wireless

Physical Characteristics

Application/Usage

Motion Detector

Depth

210 mm

Height

75 mm

Material Details

Polycarbonate - Case

Product Material

Polycarbonate

Weight (Approximate)

658 g

Width

180 mm

Miscellaneous

Compatibility

GJD D-TECT X Ranges of Wireless Detectors

Features

An RF continuity test mode facility tests the strength of the RF signal from each detector at the receiver location. When it is necessary to conduct a site survey prior to installation, the receiver can be powered temporarily with a PP3 9 V battery, Code recognition programming of each detector is both rapid and simple via a plug-in connector between detector and receiver, The D-TECT X receiver is powered by a 12 - 24V AC/DC supply, The weatherproof IP55 receiver enclosure can be mounted externally or internally up to 500 metres in line of sight to the detectors

Indoor/Outdoor

Indoor, Outdoor