Name: System Sensor MMX-10ME 10-Way Intelligent Input Monitor Card
Brand: System Sensor
SKU: MMX-10ME

System Sensor MMX-10ME 10-Way Intelligent Input Monitor Card

Brand: System Sensor

ADI #:MMX-10ME Model #: MMX-10ME Name: System Sensor MMX-10ME 10-Way Intelligent Input Monitor Card

The input of each module, suitable to point out the closing of a normally open or closed contact, supports both 2 wires open line and 4 wires loop.
The open line connection requires a 47 K 5% ¼W end of line resistor
Optionally, a resistor 33 K 5 % ¼W can be installed to verify short circuit connected to the alarm contact (this configuration complies EN54.2).

Notifier MMX-10ME 10-Way Intelligent Input Monitor Card

Product Overview

General Information

The MMX-10ME multi-module can operate with all addressable NOTIFIER Fire Panels either with CLIP protocol (1-99) or ADVANCED protocol (1-159) and on board hold 10 monitor modules.

The MMX-10ME includes the following items: Removable terminal block; DIP-SWITCH (for the module address selection); DIP-SWITCH (for the single modules masking); SMD LEDs (one for each module); Auxiliary output on 14 pin flat cable connector to drive external LEDs with no resistor. The control panel activates the LEDs.

Main Features

The input of each module, suitable to point out the closing of a normally open or closed contact, supports both 2 wires open line and 4 wires loop.
The open line connection requires a 47 K 5% ¼W end of line resistor
Optionally, a resistor 33 K 5 % ¼W can be installed to verify short circuit connected to the alarm contact (this configuration complies EN54.2).
The 4 wires loop configuration makes it possible to detect an alarm condition even if there is a cut in the loop.

Information

Category : Alarm Expansion & Accessories, Fire, Fire Control Panels, Products